 |
| RDS Weigh Log 3030 |
| On-Board
All Loader Scales |
| Suitable for agricultural loaders, shovels, compact
wheeled loaders, front-end
loaders. |
| • Operating
Voltage: 11-30 Vdc |
• System accuracy: +/- 2% (or better) |
| • Automatic compensation for variable speeds of lift |
 |
|
 |
Store up to 30 customers and 30 products through touch screen
The Weighlog 3030 incorporates the latest color touchscreen technology providing a user-friendly on-board weighing system that can be used for trailer & hopper loading, batch blending or check weighing.
Loading correctly first time maximizes productivity, reduces vehicle movement, fuel usage and machine & tire wear. |
|
| WEIGHLOG 3030 uses a 4.3” color, hi brightness resistive touchscreen display and additional physical keys providing a modern and ergonomic operator interface. Suitable for use with up to 10 different attachments e.g. buckets or forks, the system can be retrofitted onto compact wheeled loaders, telescopic handlers, forklifts, Skidsteer type loaders and tractor loaders. The system measures hydraulic pressure using up to 4 sensors at a certain position on the lifting cycle compensating for pressure changes in the system. Enhanced stores capability comprising 30 products, 30 customers and up to 5 different recipes designed around animal feed mixing, dispensing and grain handling enable accurate record keeping and traceability. The system provides communication and data storage via SD card reader and USB 2.0 host allowing quick, safe and efficient uploading and downloading of data. |
|
 |
Features
- Easy to use 4.3’’ color touch screen display
- Hi brightness resistive touchscreen display and additional physical keys providing a modern and ergonomic operator interface.
- Stores up to 30 Customers and 30 Products and up to 5 different recipes designed around
animal feed mixing, dispensing.
- Load on the go, no stopping the machine or bucket
- Communication via SD card and USB Memory Stick
- Target loads
- Up to 10 attachments
- Displays: Target weight, Accumulated weight, Bucket count, Product name, Customer name
- Calibration 'Nudge'
- Optional Printing capability with ICP 300 Printer
|
|
 |
We make it easy! Providing you with the information and parts for your install. |
|
User installable! |
|
Just
1 day to install & Calibrate! |
|
| WEIGHING
MODE The system is based on the measurement of the pressure
of the lifting cylinder in the up phase (by means of the pressure
transducer) and the calculation of the up speed. Accurate weight is achieved after the arm has passed the proximity switches. To perform the weighing just lift the arm keeping
the motor revs constant is recommended, but not necessary. It is recommended practice to keep the lifting lever hooked and wait for
the unit to give the whistle which signals when the system is performing
the weighing. It is important during this the upward movement must remain constant,
as must the motor revs. The machine should be level as possible
and should be subjected to as few jolts as possible. |
 |
| Specifications |
|
Operating Voltage: |
11 - 30Vdc |
Temperature range: |
-20 to +70°C operating |
System accuracy: |
+/- 2% of capacity (or better) |
Prox sensor: |
2 Prox Sensor |
Load sensor rating: |
1 Sensor: 0 - 250 bar (up to 4 sensors) |
Enviro. protection: |
Instrument sealed to IP54 |
Enclosure: |
Full RFI/EMI protection
ABS outer casing |
| Warranty: |
2 years |
| Recommended - puchase 2 Sensor systems: (0 - 250 bar) |
|
|
 |
 |
Systems
Requirements: Your hydraulic systems meet manufactures
standards. Leaks in your hydraulic system may degrade the performance
this system. |
|
 |
ICP-300 Printer Features:
- Robust, shockproof housing.
- 5 Kbytes buffer ram allows simultaneous use of printer and instrument.
- Accepts ASCII format data.
Benefits:
- Provides legible hard-copy print-outs of machinery utilization.
- Facilitates invoice preparation.
- Provides error-free records.
|
|
What
You Should Know!
| What
you should know about Hydraulic system. |
| • |
Do
not install scale systems on any equipment that are
poorly maintained. |
| • |
Hydraulic
leak can degrade the performance of any system. |
| • |
Under
powered equipment can cause hydraulics to surge. This is caused
by over sized attachments. |
| • |
With
each of our system you will receive helpful information that
will increase the accuracy of your system. |
| • |
Recommended for all wheeled loaders, telescopic handlers, forklifts, skid steer type loaders and tractor loaders. |
|
What you
need to calibrate scale:
• Calibration of this system
requires a known weight.
Most customers calibrate with on site with available materials. Scale must be calibrated at full capacity of the loader! Load a truck, verify the weight on a truck scale. Using the nudge feature in the scale indicator, correct the calibration as needed. (If calibrated with less than full capacity of bucket the weights may not be accurate)
Note: The
weighing system is hydraulic based. The hydraulic system on the machine
MUST be free of any leaks or defects. Mechanically, the machine must
be sound. Free of play in boom upper structure. Any discrepancies in
the areas will result in improper operation of the weighing system. |
